Compressor (Dual-band / stacked VCA compressor) · $301.32
The Becos CompIQ TWAIN Pro is an analog dual-band / stacked VCA compressor pedal based on the Two THAT 4320 Analog Engines with Blackmer VCAs (dual-band compressor), with Input Preamp Trim (-12 to +12dB), per-band (Lows/Highs) Threshold, Ratio, Make-up Gain; variable Crossover frequency; Dry/Wet Mix controls, made in Austria. From $301.32.
| Category | Compressor (Dual-band / stacked VCA compressor) |
| Circuit / based on | Two THAT 4320 Analog Engines with Blackmer VCAs (dual-band compressor) |
| Signal | Analog |
| Controls | Input Preamp Trim (-12 to +12dB), per-band (Lows/Highs) Threshold, Ratio, Make-up Gain; variable Crossover frequency; Dry/Wet Mix |
| Switches | Per-band Knee (Hard/Soft), Attack/Release timing (Fast/Slower), Feed-Forward/Feed-Back/Combined mode; side-chain filters (Lows +/-12dB @70Hz, Highs +/-9dB @3kHz) |
| Footswitches | 1 (true bypass) |
| Bypass | true bypass |
| True bypass | Yes |
| I/O | mono in (1MOhm) / out (<100Ohm); optional DITOS transformer-coupled balanced output (10kOhm, +6dB default) |
| Power | 9-18V DC, center negative |
| Power draw | 95 mA |
| Enclosure | large |
| Dimensions | 12 x 10.2 x 5.4 cm (net) |
| Weight | 0.39 kg (net) |
| Country of manufacture | Austria |