EQ / Preamp (Rockman Sustainor Model 100A reproduction, 2-channel) · $412.72
The HTJ-Works RMS-100A Sustainable Driver is an analog rockman Sustainor Model 100A reproduction, 2-channel pedal based on the Rockman Sustainor, with PREGAIN; SUSTAIN; NOISEGATE; BOOST; SEMI.C; PHASE SHIFT; TREBLE; RTHM_VOL; VOL; T-BOOST controls, made in Japan. From $412.72.
| Category | EQ / Preamp (Rockman Sustainor Model 100A reproduction, 2-channel) |
| Circuit / based on | Rockman Sustainor |
| Signal | Analog |
| Controls | PREGAIN; SUSTAIN; NOISEGATE; BOOST; SEMI.C; PHASE SHIFT; TREBLE; RTHM_VOL; VOL; T-BOOST |
| Switches | 4 preamp modes CLN / CLN2 / EDGE / LEAD assignable across 2 channels; SEMI.C clipping (CLEAN2 only); noise gate on/off; buffer/through select on the board |
| Footswitches | 2 (bypass on the right, channel changeover on the left) plus a latching external channel-switch jack (tip = channel select, ring = bypass mode) |
| Bypass | switchable (buffer or through, selectable on the board) |
| I/O | mono in / mono out, plus an external channel-switching jack |
| Power | 9V DC center-negative 2.1mm only (300mA or more recommended); reproduces the original's +/-8V rails internally |
| Power draw | 300 mA |
| Dimensions | approx. 94 x 120 x 57 mm (excluding protrusions) |
| Country of manufacture | Japan |
Closest matches from other makers, by spec and circuit.